SOUTHERN IoT · HARDWARE
Explore Seeed Studio AI and IoT hardware. Review specifications, request a quotation, or ask our team about software integration.
A607 Jetson Carrier Board is a powerful extension board that supports Jetson Orin™ NX/Nano modules. It features 2 GbE network port, pre-installed SMD WiFi/BlueTooth, M.2 Key M for SSD. It also contains CAN/I2C/RS232/RS485/SPI/UART, 6x USB ports, a fan, RTC, and flexible 12-36V power supply.
This Aluminum Heatsink offers essential, active, physical, and strong fan air cooling function for Jetson Orin™ NX/Orin™ Nano/Xavier NX modules, to avoid overheating and throttling problems while operating tough computing tasks. It is designed for continuous deployment. It can be customized to air flow speed through PWM function and supports reComputer J401 board official. CANNOT be used on A603 board directly. Would need extension wire.
The J401 carrier board is an advanced, open-source extension board for NVIDIA Jetson Orin Nano/ Orin NX modules. It breaks out typical IO interfaces from the SoM, offering high and low-speed connectivity. Its form-factor, performance, and ease of development make the Jetson Orin system flexible and scalable for rapid market entry and ongoing updates.
The J401 carrier board is an advanced, open-source extension board for NVIDIA Jetson Orin Nano/ Orin NX modules. It breaks out typical IO interfaces from the SoM, offering high and low-speed connectivity. Its form-factor, performance, and ease of development make the Jetson Orin system flexible and scalable for rapid market entry and ongoing updates.
Jetson A205E Carrier Board is built with industrial RS232 and 485 interfaces and high-speed I/O communication, fully compatible with NVIDIA® Jetson Nano™ / Xavier™ NX /TX2 NX module and for the industrial embedded AI system building.
RPLIDAR A2M12 is a 360-degree triangulation laser sensing scanner that samples at up to 16 kHz, capable of generating 2D point cloud map information for a 12m radius, within low precision, and running for up to 5 years. This next-generation low-cost, high-performance laser scanner will be your great instrument for in-home robots, 3D modeling, etc.
reComputer J202 has nearly the same design and function as NVIDIA® Jetson Xavier NX™ carrier board, perfectly works with Jetson Nano/Xavier NX/TX2 NX module, and consists of 4x USB 3.1 gen 2 ports, M.2 key E for WIFI, M.2 Key M for SSD, RTC, CAN, Raspberry Pi GPIO 40-pin, and so on.
reComputer J101 carrier board is a cost-effective and interface-rich NVIDIA Jetson Nano compatible carrier board. It included HDMI2.0, 2x USB 2.0, 1x USB 3.0, micro SD card slot, 2 xCSI, M.2 key E WIFI / BT, GPIO, I2C, I2S, Fan, and other rich peripheral interfaces. It has nearly the same functional design and exactly the same size as the carrier board of NVIDIA® Jetson Nano™ B01 Developer Kit.
reComputer J202 has nearly the same design and function as NVIDIA® Jetson Xavier NX™ carrier board, perfectly works with Jetson Nano/Xavier NX/TX2 NX module, and consists of 4x USB3.1 gen2 ports , M.2 key E for WIFI, M.2 Key M for SSD, RTC, CAN, Raspberry Pi GPIO 40-pin, and so on.
The Jetson Nano Module Active Heat Sink provides essential and strong physical cooling for the Jetson Nano's high-intensity workloads, using a 7 blades fan mechanism for active air cooling. It allows for customizing fan speed through PWM, which helps to avoid overheating and throttling issues. It can be customized to air flow speed through PWM function.
This IMX 219 CMOS camera module is based on the high-resolution Sony IMX 219 sensor and supports both M12 CS mount lenses. The 2 CSI (Camera Serial Interface) ports are 15 and 22 pin respectively, meaning this sensor can be easily assembled most of the board with the CSI port, and with plenty of choices in the aspect of the lens.
Here comes NVMe M.2 2280 Internal SSD with 128GB capacity , compatible with Desktops & Laptops that accept PCIe NVMe Gen 3 drives.
Here comes NVMe M.2 2280 Internal SSD with 256GB capacity , compatible with Desktops & Laptops that accept PCIe NVMe Gen 3 drives.
Here comes NVMe M.2 2280 Internal SSD with 512GB capacity , compatible with Desktops & Laptops that accept PCIe NVMe Gen 3 drives.
Jetson A203 V2 carrier board is an upgraded version of Jetson-A203, which is still an extended carrier board specifically for NVIDIA Jetson Nano / Xavier NX/TX2 NX. The rich peripheral interfaces (supporting wifi, bluetooth, SSD, etc) make it suitable for end-to-end AI robot applications in manufacturing, logistics, retail, agriculture, and other industries. With the powerful NVIDIA controlling module(not included) and its compact design, it is good for Video Analysis and Robotics like UAVs, Unmanned boat, Unmanned submarines, etc.
RPLIDAR S2 is a new generation of low-cost two-dimensional laser ranging radar, which can perform a 360-degree omni-directional laser ranging scan within a 30-meter radius of a two-dimensional plane, and generate a flat point cloud map of the space in which it is located information. It can be used in practical applications such as map surveying and positioning and navigation.
Attention It is recommended to buy the A203(Version2) , which can perfectly cover and exceed the functions of this product. For more NVIDIA product purchase solutions, you can go to this page to learn more. Check out our new arrivals! reComputer Jetson-10-1-H0 built with Jetson Nano Production Module, reComputer Jetson-20 built with Jetson Xavier NX Production Module also includes on-device carrier board and heatsink.
Jetson A205 is an extension board specifically for NVIDIA Jetson Nano / Xavier NX/TX2 NX. With the powerful NVIDIA controlling module(not included) and its peripheral interfaces such as SATA and CSI camera interfaces, it's good for diverse edge AI applications like automated optical inspection,robotics, drone, 3D modeling, etc, suitable in manufacturing, logistics, retail, agriculture, and other industries.
This Aluminium Heatsink for the Jetson TX2 NX Module provides effective cooling for prolonged high-performance computing, with active airflow supplied by an integrated cooling fan. Check out our new arrivals! reComputer J10 Powered by NVIDIA Jetson Nano Production Module, reComputer J20 Powered by NVIDIA Jetson Xavier NX Production Module also includes on-device carrier board and heatsink.
The AC Power Cord is a 50cm, 3-pronged power cable in EU-Stardand for reServer.
The AC Power Cord is a 50cm, 3-pronged power cable in US-Stardand for reServer.
This Heatsink for the Jetson Nano Module offers effective cooling for prolonged high-performance computing with heat dissipation through its aluminum body. Check out our new arrivals! reComputer Jetson-10-1-H0 built with Jetson Nano Production Module, reComputer Jetson-20 built with Jetson Xavier NX Production Module also includes on-device carrier board and heatsink.
Discuss software, AI, or IoT with Southern IoT and shape an approach together.
