NVIDIA Jetson

AC Power Cord - US

The AC Power Cord is a 50cm, 3-pronged power cable in US-Stardand for reServer.

Aluminum Heatsink for Jetson Nano Module

This Heatsink for the Jetson Nano Module offers effective cooling for prolonged high-performance computing with heat dissipation through its aluminum body. Check out our new arrivals! reComputer Jetson-10-1-H0  built with Jetson  Nano Production Module,  reComputer Jetson-20   built with Jetson Xavier NX Production Module also includes on-device carrier board and  heatsink.

RPLiDAR A1M8-R6 360° Laser Scanner Kit - 12M Range

RPLIDAR A1 is a low cost 360-degree 2D laser scanner (LIDAR) solution developed by SLAMTEC. The system can perform a 360degree scan within a 6meter range. The produced 2D point cloud data can be used in mapping, localization, and object/environment modeling.

re_computer case: Vesa Mounting Bracket

This is the re_computer case: Vesa Mounting Bracket that allows  installing the re_computer case to the back of the monitor using the standard Vesa Mounting Holes .

NVIDIA® Jetson Nano™ 2GB Developer Kit (802.11ac Wireless Adapter Not Included)

It is recommended to buy our newly released reComputer J1020 v2.

IMX219-83 8MP 3D Stereo Camera Module – Compatible with Jetson Nano/ Xavier NX

This is a 3D stereo camera module that features dual IMX219 cameras onboard with 8 megapixels on each camera, which is suitable to use with the NVIDIA Jetson Nano and NVIDIA Jetson Xavier NX Development Kits. Check out our new arrivals! reComputer Jetson-10-1-H0  built with Jetson  Nano Production Module,  reComputer Jetson-20   built with Jetson Xavier NX Production Module also includes on-device carrier board and  heatsink.

IMX219-130 8MP Camera with 130° FOV - Compatible with NVIDIA Jetson Nano/ Xavier NX

This is an 8-megapixel camera with a FOV (field-of-view) of 130 degrees, which is suitable to use with the NVIDIA Jetson Nano and NVIDIA Jetson Xavier NX Development Kits. Check out our new arrivals! reComputer Jetson-10-1-H0  built with Jetson  Nano Production Module,  reComputer Jetson-20   built with Jetson Xavier NX Production Module also includes on-device carrier board and  heatsink.

IMX219-77 8MP Camera with 77° FOV - Compatible with NVIDIA Jetson Nano/ Xavier NX

This is an 8-megapixel camera with a FOV (field-of-view) of 77 degrees, which is suitable to use with the NVIDIA Jetson Nano and NVIDIA Jetson Xavier NX Development Kits. Check out our new arrivals! reComputer Jetson-10-1-H0  built with Jetson  Nano Production Module,  reComputer Jetson-20   built with Jetson Xavier NX Production Module also includes on-device carrier board and  heatsink.

IMX219-160 8MP Camera with 160° FOV - Compatible with NVIDIA Jetson Nano/ Xavier NX

This is an 8-megapixel camera with a FOV (field-of-view) of 160 degrees, which is suitable to use with the NVIDIA Jetson Nano and NVIDIA Jetson Xavier NX Development Kits. Check out our new arrivals! reComputer Jetson-10-1-H0  built with Jetson  Nano Production Module,  reComputer Jetson-20   built with Jetson Xavier NX Production Module also includes on-device carrier board and  heatsink.

IMX219-160IR 8MP Camera with 160° FOV - Compatible with NVIDIA Jetson Nano/ Xavier NX

This is an 8-megapixel camera with a FOV (field-of-view) of 160 degrees, which is suitable to use with the NVIDIA Jetson Nano and NVIDIA Jetson Xavier NX Development Kits. It also has two IR LEDs to enable night vision capabilities. Check out our new arrivals! reComputer Jetson-10-1-H0  built with Jetson  Nano Production Module,  reComputer Jetson-20   built with Jetson Xavier NX Production Module also includes on-device carrier board and  heatsink.

IMX219-77 Replacement Camera Module with 77° FOV for Raspberry Pi V2 Camera

This is an 8-megapixel camera with a FOV (field-of-view) of 77 degrees, which is suitable to use with the Raspberry Pi Camera Module V2. Check out our new arrivals! reComputer Jetson-10-1-H0  built with Jetson  Nano Production Module,  reComputer Jetson-20   built with Jetson Xavier NX Production Module also includes on-device carrier board and  heatsink.

NVIDIA® Jetson Xavier™ NX Developer Kit

we recommend reComputer J2021 powered by Xavier NX as an alternative , the full system is pre-installed with Jetpack, the carrier board is the same form factor carrier board as the Jetson NX Developer Kit, consisting of 4xUSB3, M.2 Key M, HDMI, and DP, along with the aluminum case, heatsink. Please visit the Jetson ecosystem page to find all Jetson product lines.

re_computer case: Most Compatible Enclosure for popular SBCs including ODYSSEY - X86J4105, Raspberry Pi, BeagleBone and Jetson Nano/Xavier NX

The re_computer case is specially designed for the re_computer system, compatible with all popular SBCs, with a removable acrylic cover on the top, and with a stackable structure to extend endless possibilities. We have designed and left screw holes for the installation of the most popular SBCs including our new released  ODYSSEY - X86J4105 ,  Raspberry Pi ,  BeagleBone , and  Jetson Nano .

NVIDIA® Jetson Nano™ Developer Kit - B01

NVIDIA® Jetson Nano™ Developer Kit B01 with 0.5 TFLOPs of power. It features a rich set of IOs, a passive heatsink, pre-built Jetpack 4.6.1 , 2x SCI, 4 x USB 3 , M.2 Key E, 1x HDMI and 1x DP.

NVIDIA Jetson TX2 Developer Kit

NVIDIA Jetson TX2 Developer Kit contains an NVIDIA Jetson TX2 Module and many other accessories as a kit. It is mainly developed for AI and deep learning applications.

Aluminum Case for Nvidia Jetson Nano

NVIDIA® Jetson Nano™ Developer Kit

It is recommended to buy our newly released  reComputer J1020  powered by NVIDIA Jetson Nano Production Module includes a carrier board and heatsink.  Check it out !  Find more  NVIDIA Jetson-powered AI platforms  here.

RPLiDAR A1M8 360 Degree Laser Scanner Kit - 12M Range

RPLIDAR A1 is a low cost 360-degree 2D laser scanner (LIDAR) solution developed by SLAMTEC. The system can perform a 360degree scan within a 6meter range. The produced 2D point cloud data can be used in mapping, localization, and object/environment modeling.   Note: This product has been replaced by an upgraded version, RPLiDAR A1M8-R6 . Click here for more details.

RPLiDAR A3M1 360° Laser Scanner Kit - 25M Range

The RPLIDAR A3M1 is the next generation low cost 360-degree 2D laser scanner (LIDAR) solution developed by SLAMTEC. It can take up to 16000 samples of laser ranging per second with high rotation speed. And equipped with SLAMTEC patented OPTMAG technology, it breakouts the life limitation of the traditional LIDAR system so as to work stably for a long time.